Bradley S19-310K Eye/Face Wash

The Bradley S19-310K saves space and fits easily into any work environment. Shower valve operates quickly by a pull rod with a triangular handle. Shower provides a superior washdown with a more even spray pattern. Eyewash operated by a large, highly visible push handle. Safe, steady water flow under varying water supply conditions from 30–90 PSI is assured by integral flow control in the sprayhead assembly. NOTE: The ANSI Z358.1 standard requires an uninterruptable supply of flushing fluid at a minimum 30 PSI flowing pressure.

SpinTec™ Showerhead
Standard showerhead is 3.1” (78.7mm) diameter highly visible yellow impact-resistant plastic and includes a 10-3/4” [273mm] diameter corrosionresistant stainless steel shroud. SpinTec drench showerhead features integral 23 GPM flow control, conserving water and helping to accurately size your tepid water system.
Shower Valve
Chrome-plated brass 1” NPT stay-open ball valve. Operated by a stainless steel pull rod with triangular handle.
Eyewash Bowl
10-3/4” (273mm) diameter corrosion-resistant stainless steel.
Standard Sprayhead Assembly
Chrome-plated brass sprayhead with twin, soft flow, eyewash heads and protective sprayhead covers. Safe, steady water flow under varying water supply conditions from 30–90 PSI is assured by integral flow control in the sprayhead assembly. NOTE: The ANSI Z358.1 standard requires an uninterruptable supply of flushing fluid at a minimum 30 PSI flowing pressure.
Eyewash Valve
Chrome-plated brass 1/2” NPT stay-open ball valve. Hand operated by highly visible safety yellow PVC push handle. S19-310SS is all stainless steel.
Face Spray Ring
Chrome-plated circular spray ring provides supplemental face spray. Flow control assures adequate flow from eyewash nozzles and face spray ring from 30-90 PSI.
Pipe and Fittings
1-1/4” galvanized steel with BRADTECT™ safety yellow coating.
Water Supply
1-1/4” NPT.

• Spec Sheet
• Installation Guide